Conveyor Bread and Bun Toasters - 250-500 Slices Per Hour* Operator’s Manual
3
PREVENTATIVE MAINTENANCE
Contact an authorized service agent for a professional cleaning of the components.
TROUBLESHOOTING
Problem
Might be Caused By
Course of Action
Toaster does not heat and the
conveyor belt does not move.
Toaster is not plugged in.
Plug in the toaster.
Power knob setting is incorrect.
Rotate the power knob to the ON (|) position.
The wall breaker may be tripped.
1. Inspect for tripped breaker.
2. Reset the breaker.
3. If the breaker was not tripped, inspect the toasting chamber for
broken heater elements.
4. For broken elements, contact Vollrath Technical Services.
The reset may be tripped.
Look under the toaster to see if an object is preventing the fan
blades from turning.
1. Rotate the power knob to the OFF (O) position.
2. Unplug the toaster.
3. Wait 30 minutes for the toaster to cool.
4. Remove the object.
5. Plug in the toaster.
6. Rotate the power knob to the ON (|) position.
7. Press the reset button, located below the back panel. You
should hear and feel the button reset. The toaster should start to
operate.
8. If the problem persists call Vollrath Technical Services.
Inspect the fan blades to see if they are dirty.
1. Rotate the power knob to the OFF (O) position.
2. Unplug the toaster.
3. Wait 30 minutes for the toaster cool.
4. Clean the fan blades.
5. Plug in the toaster.
6. Rotate the power knob to the ON (|) position.
7. Press the reset button.
8. If the problem persists call Vollrath Technical Services.
Toaster heats and the conveyor belt
does not move.
There may be a problem with the motor/
speed control or drive chain.
Contact Vollrath Technical Services.
Top or bottom heat tubes do not
heat.
One or more elements may have burned
out.
Contact Vollrath Technical Services.
Toaster repeatedly overheats.
The crumb tray may not be installed.
Verify the crumb tray is installed.
The fan may be dirty.
Verify the fan blades are clean. See instructions above for
inspecting and cleaning the fan blades.
There may be a problem with the fan.
Contact Vollrath Technical Services.
The fan is not running.
There may be a problem with the fan.
Contact Vollrath Technical Services.
