H. Vollmer GmbH
Istruzioni per l'uso dell'art. nr: 38037
Pagina 2 di 5
aggiorn. 05.11.2015
4. Messa in funzione
1. Estraete il contenuto dell'imballo e controllane la completezza e la mancanza di danni.
Se accertate problemi, rivolgetevi al rivenditore.
2. Srotolate il LED-Strip dal mandrino
3. Pulite la superficie sulla quale volete apportare il LED-Strip.
4. Per garantire la migliore tenuta del LED-Strip,
la superficie deve essere asciutta, piana a sufficienza, pulita e non grassa.
5. Staccate la protezione della superfie adesiva del LED-Strip e attaccatela subito.
Consiglio:
Gli Strips-LED sono autoadesivi. Questa colla può perdere la sua forza con il passare del
tempo, motivo per cui consigliamo di aggiungere sempre della colla aggiuntiva adatta in più
punti, al momento della collocazione del LED-Strip.
6. Collegate la spina di collegamento del LED-Strip con il manicotto del
controller.
7. Inserite la spina del trasformatore di rete nel manicotto del controller.
8. Inserite la spina del trasformatore di rete nella presa.
9. E' possibile scorciare il LED-Strip nella lunghezza desiderata.
A tale scopo è sufficiente tagliare con le forbici il collegamento color rame.
Suggerimento:
Si prega di fare attenzione a che, dopo aver scorciato, la protezione del LED-Strip in questa posizione non
è più attiva!
Per ripristinare la protezione esistente, il punto tagliato deve essere richiuso con del silicone o un tubicino
flessibile di gomma.
10. Non esiste nessuna possibilità di sostituire i LED.
5. Malfunzionamenti
Il LED Strip non si accende
Il LED Strip ha una direzione di flusso. Controllate il collegamento con il deviatore in direzione del LED
Strip.
E' collegato il LED Strip con la rete elettrica?
Il telecomando non funziona.
E' collegato il LED Strip con la rete elettrica?
Le batterie sono inserite correttamente? Controllate le polarità.
Batterie deboli o difettose. Cambiare le batterie
Sensore della distanza? Ripicciolite la distanza dal sensore.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein