41.VW.2210.3102_BA_V00_EN
VAS 681 003A
26
EN | Operation
Initial startup
This section explains the actions you must perform when starting up the product for the first
time.
Follow the general safety instructions.
Insert the three-phase plug all the way into the three-phase socket. Observe the keying
on the plug!
The high-voltage DC charger starts up automatically once connected to the power
supply.
The message “
Language
” appears on the LC display. Below this is the language
currently set on the high-voltage DC charger.
Use function keys F2 and F3 to select the desired language.
Confirm your selection with function key F4.
The language is now set on the high-voltage charger.
The high-voltage DC charger starts the self-test.
Cold start
A cold start is when you start up the high-voltage DC charger after it has been disconnected
from the power supply.
This section explains the actions required to carry out a cold start of the product.
To carry out a cold start, perform the steps for initial startup, with the exception of steps 3
and 4.
