41.VW.2210.3102_BA_V00_EN
VAS 681 003A
36
EN | Operation
Main menu
From the main menu, press function keys F2 to F4 to access the following submenus.
Exit the submenu by pressing function key F1 (exit).
Function
key
Assignment
Function
F2
Display the operating parameters. The operating
parameters are used to monitor the charging process
(see the “Operating parameters” section).
F3
Display the configuration parameters. You can adjust
the parameters in this area (see the “Configuration
parameters” section).
F4
Displays the information parameters (see the
“Information parameters” section).
Operating parameters
The “
Operating parameters
” submenu displays the current parameters for the charging
process. The parameters are sequentially numbered and are explained in the following table.
Navigate through the parameters by pressing function keys F2 (down) and F3 (up).
Exit the parameter menu by pressing function key F1 (exit).
Parameter
Values
Meaning
Unit
Charging
time
Act
The elapsed charging time
min.
End
The remaining charging time
SOC
(State of
Charge)
Set
State of charge at which the charging process is
terminated
%
Act
Current state of charge
Power
Max
Maximum output power of the high-voltage DC
charger
kW
Act
Current output power of the high-voltage DC
charger
Counter
Amount of energy delivered during the charging
process
kWh
Electrical charge delivered during the charging
process
Ah
Protocol
Displays the charging communication protocol
used
CP
The following messages may be displayed:
