C B R L i n e To o l ( VA S 6 3 2 1 A / 6 a n d VA S 6 3 2 1 A / 7 )
35
The CBR LineTool is an important component of the Carbon VAS 6321 A. It works in a similar way to the CBR StrongTool, but it
can also be used to reach widely spaced support points on the body.
This enables the user to repair large areas of damage, especially on doors, hoods, side panels and body parts that are not
alloyed to a higher strength.
The CBR LineTool is available in two lengths (1600 mm in the basic version of the VAS 6321 A and 1000 mm as an option), and
because of its sliding pulling unit it is very much a universally applicable tool.
LineTool 160 with straight feet
LineTool 100 with double feet
LineTool 100 with the second pulling
unit and straight feet
Second pulling unit can be used for
both LineTools
The LineTool can be supplemented with additional pulling units that can be positioned independently on the LineTool. Thus,
you can create the option to pull at several points at the same time.
The individual elements of the double feet can be rotated as desired to
provide perfect support on the body.
Here, too, different feet allow a wide range of options
for reshaping damage in the vehicle body.
The LineTool also has two suction cups with which it
can be fixed to the vehicle body or glass surfaces at
the desired working height.
