C B R St r o n g To o l ( VA S 6 3 2 1 A /4 )
33
11.2 CBR StrongTool enhancement set (VAS 6321 A/2)
Extension blade, and small and large L-feet
The various individual parts allow many possible combinations, thus in
practice a suitable solution can be found for any challenge.
11.3 Working with the CBR StrongTool (VAS 6321 A/2)
Incorrect
Incorrect
Correct
Foot must be placed central to the edge.
Correct
Foot must be placed central to the edge.
The large knurled nut allows fast, infinitely variable
adjustment of the pull rod when working with the
StrongTool.
Important:
When working with the straight feet and
supporting them on an edge, it is essential to ensure that
the support point is exactly in the center of the feet. If the
support point is beyond the center of the feet and the
pulling forces are high, this will generate a bending moment
which can cause the feet to break.
The feet may only ever be put under vertical pressure when
pulling – whenever a transverse pull is performed it is
essential to use the double feet.
