In the displayed menu, press the arrow keys
or
⇒
Fig. 21 until the desired menu option is
marked. A frame appears around the selected option.
Press the
button
⇒
Fig. 21 to make the required changes. A tick indicates that the particular
system or function is active.
Returning to menu selection
Press the
or
button
⇒
Fig. 21 .
If warning messages about malfunctions are displayed when the ignition is switched on, it may not
be possible to adjust some settings as described, or the information display may appear differently.
If this is the case, take the vehicle to a qualified workshop to have the malfunction rectified.
Button for driver assist systems
Fig. 22 On the turn signal and main beam lever on the left of the steering column: button for driver
assist systems.
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
You can switch the driver assist systems listed in the Assist systems menu on and off with the button
on the turn signal and main beam lever.
Switching individual driver assist systems on and off
Press the button
⇒
Fig. 22 in the direction of the arrow to open the Assist systems menu.
Select the driver assist system and switch it on or off
⇒
Operating the instrument cluster . A tick
indicates that a driver assist system is switched on.
Mark and confirm your selection by pressing the
button on the wiper lever, or by
pressing the
button on the multifunction steering wheel.
The driver assist systems can also be switched on and off in the vehicle settings in the Infotainment
system
⇒
Vehicle settings menu .
Infotainment system controls and displays
