The buttons on the wiper lever are omitted in vehicles equipped with a multifunction steering wheel
⇒
Operating using the wiper lever .
WARNING
Accidents and injuries can occur if the driver is distracted.
Never operate the menus on the instrument cluster display while the vehicle is in motion.
Check the system settings after charging or replacing the 12-volt vehicle battery. System settings
may be changed or deleted if the power supply is interrupted.
Operating using the wiper lever
Fig. 20 On the right of the steering column: buttons on the wiper lever (illustration).
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
If any priority 1
⇒
Instrument cluster warning messages are displayed, you will be unable to open
any menus. Some warnings can be confirmed and hidden using the button
⇒
Fig. 20 ①.
Selecting a menu or information display
Switch on the ignition.
Personalisation: select user.
If a message or vehicle pictogram is displayed, press the
⇒
Fig. 20 ① button, several times if
necessary.
To display the menus
⇒
Instrument cluster menus or to return from a menu or an information
display to the menu selection, hold down the rocker switch
⇒
Fig. 20 ②.
To browse through the menus, press the rocker switch up or down.
To open the menu or information display, press button
⇒
Fig. 20 ① or wait until the menu or
information display opens automatically after a few seconds.
Changing settings in menus
