In the menu displayed, press the rocker switch
⇒
Fig. 20 ② on the wiper lever upwards or
downwards until the desired menu option is marked. A frame appears around the selected option.
Press the
⇒
Fig. 20 ① button to make the required changes. A tick indicates that the particular
system or function is active.
Returning to menu selection
In the menu, select the Back menu option to exit the menu.
If warning messages about malfunctions are displayed when the ignition is switched on, it may not
be possible to adjust some settings as described, or the information display may appear differently.
If this is the case, take the vehicle to a qualified workshop to have the malfunction rectified.
Operating using the multifunction steering wheel
Fig. 21 Right-hand side of the multifunction steering wheel: controls for using the menus and
information displays in the instrument cluster.
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
If any priority 1
⇒
Warning and information messages warning messages are displayed, you will be
unable to open any menus. Some warnings can be confirmed and hidden with the
button on the
multifunction steering wheel
⇒
Fig. 21 .
Selecting a menu or information display
Switch on the ignition.
Personalisation: select user.
If a message or the vehicle pictogram is displayed, press the
button
⇒
Fig. 21 , several times if
required.
Press the
or
button to display a menu or browse through a menu
⇒
Fig. 21 .
To open the menu or information display, press
⇒
Fig. 21 or wait until the menu or information
display opens automatically after a few seconds.
Changing settings in menus
