Pro
te
cte
d b
y c
op
yri
gh
t. C
op
yi
ng
fo
r p
riv
at
e
o
r c
o
m
m
e
rc
ia
l p
u
rp
o
s
e
s
, i
n
p
a
rt
o
r i
n
w
h
o
le
, i
s
n
o
t p
e
rm
itt
ed
u
nl
es
s a
ut
ho
ris
ed
by
Vo
lksw
agen
AG. Volkswagen AG doe
s not
gua
ran
tee
or a
cc
ep
t a
ny
lia
b
ilit
y w
ith
re
s
p
e
c
t t
o
th
e
c
o
rr
e
c
tn
e
s
s
o
f
in
fo
rm
a
tio
n
in
th
is
d
oc
um
en
t.
C
op
yrig
ht b
y V
olk
sw
age
n A
G.
– Remove any adhesive residue of double-sided adhesive tape
on rear lid with adhesive strip remover -VAS 6349- .
– Cut back the remains of the adhesive sealing material to ap‐
prox. 2 mm shortly before installing the parts, without damag‐
ing the paintwork.
The cut surfaces do not require additional cleaning.
Note
The remaining material is required as a base for the new adhesive
sealing material.
If a new rear lid is used
– Place rear spoiler on rear lid and mark the mounting position,
then remove rear spoiler again.
– Clean marked bonding surface with cleaning solution (⇒ Elec‐
tronic parts catalogue “ETKA” ).
Caution
Take great care to ensure that glass/paint primer is not applied
outside the marked area. If glass/paint primer is applied out‐
side the marked area, it can be removed up to approx. 1 minute
after application of primer with a lint-free cloth and cleaning
spirit. After this time, cleaning is no longer possible because
the glass/paint primer starts to adhere to the paint.
– Prime marked bonding surfaces for 1K glass adhesive with
glass/paint primer (⇒ Electronic parts catalogue “ETKA” ).
• Drying time 10 minutes
If a new rear spoiler is used
– Clean bonding surfaces with cleaning solution (⇒ Electronic
parts catalogue “ETKA” ).
Caution
Take great care to ensure that glass/paint primer is not applied
beyond the bonding surfaces. If glass/paint primer is applied
outside the bonding areas, it can be removed up to approx. 1
minute after application of primer with a lint-free cloth and
cleaning spirit. After this time, cleaning is no longer possible
because the glass/paint primer starts to adhere to the paint.
– Prime bonding surfaces for 1K glass adhesive with glass/paint
primer (⇒ Electronic parts catalogue “ETKA” ).
• Drying time 10 minutes
Instructions for applying double-sided adhesive tape
♦ If the rear spoiler is being installed for first time on a newly
painted surface, the procedure described in ⇒ Workshop
manual "Paint"; ⇒Paintwork repairs; ⇒Paint finish; ⇒Mouldings
& Films must be followed.
♦ If the rear spoiler is removed and reinstalled, only use the ad‐
hesive remover ⇒ Electronic parts catalogue “ETKA” to re‐
move residual adhesive of adhesive tape.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
4. Rear spoiler
271
