Turn signal lever and high beam switch
Fig. 70
Turn signal lever and high beam switch.
¤
Please first read and note the introductory information and heed the WARNINGS
Move the lever to the desired position.
(A)
Right turn signal.
(B)
Left turn signal.
(C)
Switching high beams on
⇒
. An indicator light
$
comes on in the instrument cluster when
the high beams are switched on.
(D)
Switching the high beams off and operating the headlight flasher. The
headlight flasher
turns on
the high beams as long as the lever is pulled and manually held in the pulled position. The
indicator light
lights up. When released, the lever moves back to the home position and turns
off the high beams. The indicator light
goes out.
Move the lever back to the home position to turn the selected feature off.
Convenience turn signal (lane change feature)
To use the convenience turn signal feature, move the lever up or down slightly, just to the point of
resistance and then release it. The turn signals and the turn signal indicator flash 3 times. If it is
switched off, they flash as long as you hold the lever up or down, and go out when you release the
lever.
The convenience turn signal feature can be deactivated by an authorized Volkswagen dealer or
authorized Volkswagen Service Facility.
WARNING
Improper use of high beams can distract and blind others, causing accidents and serious
injuries.
The turn signal light works only when the ignition is switched on. The emergency flasher works
even when the ignition is switched off,
In an emergency
.
The indicator light flashes twice as fast if a turn signal bulb is burned out.
High beams
can only be switched on when the low beams are on.
