When the ignition is switched on and memory
1
or
2
is displayed, press the
/+2%3%4
button on
the windshield wiper lever or the
OK
button on the multi-function steering wheel to toggle
between the 2 memories.
1
Single trip memory
The memory accumulates and stores information about distance driven
and fuel used from the time the ignition was switched on until the time it
was switched off.
If the ignition stays off for 2 hours or more, stored information is automat-
ically deleted. If the trip is continued within 2 hours after the ignition was
switched off, the new values are added.
2
Total trip memory
Depending on the instrument cluster version, the memory displays and
stores the accumulated driving and fuel consumption data of any number
of single trips up to a total driving time of either 19 hours and 59 minutes
99 hours and 59 minutes, and up to a total distance of either 1,999 km or
9,999 km. If one of the maximum values
2
is exceeded, then the memory
is automatically cleared and starts again from 0.
Possible MFI menu displays
The following displays can be accessed in the MFI menu if enabled under
Settings
>
MFI data
.
Displays that are not enabled will not appear.
Display
Function
Travel time
Driving time in hours (h) and minutes (min) corresponding to trip memo-
ries 1 and 2 (toggle).
Consumption
--.- mpg
Current fuel consumption in miles per gallon (l/100 km) while driving.
When units are set to miles
, dashes appear instead of a number when
the engine is running and the vehicle is standing still.
When units are set to kilometers
, the display shows liters consumed per
hour when the engine is running and the vehicle is standing still.
Consumption
--.- l/100 km
Av. consumption
--.- mpg
Average fuel consumption in miles per gallon (l/100 km) on trips per trip
memories 1 and 2 (toggle) is displayed once the vehicle has been driven
about 330 feet (100 m). Until then, dashes appear instead of a number.
The value displayed is updated every 5 seconds.
Av. consumption
--.- l/100 km
Range
-- mi
Estimated distance in miles (km) that the vehicle can go with the fuel left
in the tank the way you are currently driving. Takes account of the cur-
rent fuel consumption, among other things.
Range
-- km
Route -- mi
Distance driven in miles (km) per trip memories 1 and 2 (toggle).
Route -- km
Odometer
The odometer indicates the total distance driven by the vehicle.
Average speed
-- mph
Average speed on trips per trip memories 1 and 2 (toggle). Displayed
once the vehicle has been driven about 300 feet (100 m). Until then,
dashes may appear instead of a number. The value displayed is updated
every 5 seconds.
Average speed
-- km/h
-- mph
Digital display of the current vehicle speed.
-- km/h
Oil temperature
Current engine oil temperature (digital display).
2
May differ depending on the version of the instrument cluster.
