VoLANs VoSS12 Admin Manual Download

Page: 38 / 127

6. Basic

AdminGuide-Voss12-1.docx

Deleting Profile

To delete a profile, follow the instruction below.

Go to [Basic]/[Profile].

Then, the current profile will be displayed as Figure 6-1.

On the displayed profile, click the right

sign on the destined profile.

Change Profile Information

The following information can be changed on this profile menu.



Dialplan



Basic Feature



Conference



Voice Mail



Parking



Forwarding



Intercom



Threeway



Virtual Caller ID.

Go to [Basic]/[Profile].

Then, the current profile will be displayed as the following figure.

Click on the destined profile.

Then, change the information on the following Figure 6-3.

Figure 6-3. Change Profile

Click

Save

button to save setting.

Summary of Contents for VoSS12
































































































































Search results

Summary of Contents for VoSS12

Reviews:

Related manuals for VoSS12

Brands by name

Popular brands

VoLANs VoSS12, Admin Manual

Search results

Summary of Contents for VoSS12

Reviews:

Related manuals for VoSS12

Brands by name

Popular brands