C. How to Use FXS
122
AdminGuide-Voss12-1.docx
‘ Reset Always’.
Busy
While A(100) is on the phone, the other incoming calls A(100) can be forwarded
to B(200).Then, press *25200 on A(100), then all the other incoming calls to
A(100) while A(100) is busy will be forwarded to B(200). If you want to cancel
this feature, press *26 on A(100).
This feature can be set on [Advance]/[Feature Code Admin] Forwarding Config,
Set Busy and Reset Busy.
No Answer
When A(100) is not able to answer incoming calls, all the incoming calls can be
forwarded to B(200) by pressing *27200 on A(100). So, when A(100) can
answer incoming calls, then the calls will be forwarded to B(200). Also, if you
want to cancel this feature, press *28 on A(100).
This feature can be set [Advance]/[Feature Code Admin] Forwarding Config,
Set No Answer and Reset No Answer.
■
Pickup
Direct Pickup
When A(100) need to picks up A’s call on B(200)’s phone, press **100 on
B(200). Then, the call to A(100) can be picked up on B(200).
‘**’ can be set on [Advance]/[Feature Code Admin], Pickup Config.
Group Pickup
The users in the same Pickup Group can pickup any incoming calls by pressing
**. So if an incoming call to A(100) can be picked up on B(200) by pressing **
on B(200).
This Pickup Group can be set on [Basic]/[Group], Adding Pickup group Member.
■
Intercom
Direct Intercom
If A(100) wants to call B(200) through Intercom, press *69200 on A(100) then
B(200) will be connected with A(100) through Intercom.
‘*69’ can be set on [Advance]/[Feature Code Admin], Intercom Config,
Extension.
Group Intercom
This feature is for a user talking to more than on person by calling them with
Intercom. To use this feature go to [Basic]/[Group], Group Intercom, and add
Members to use Intercom. And, pressing the group intercom Extension, then all
the members in the group intercom will be able to use Intercom. For instance, an
Intercom Group Members are A(100), B(200) and C(300), the group intercom
Extension is 510. Then, press 510 on either A(100), B(200), or C(300) then all
the members will be connected by Intercom.
■
3 Way Call
3 way call is a feature that able to talk 3 people simultaneously. For instance,
during a call between A(100) and B(200), they want to invite C(300), then hook
flash on A(100) and call C(300) then B and C will be connected. Then, hook flash
again on A to make 3way call. Accordingly, A, B and C can talk simultaneously.
For 3way call setting, go to [Basic]/[Profile], check Three-way to make this feature
enable. If Three-way feature is checked ‘No’, then hook flash on A(100) will work
as transfer.