VOKKERO GUARDIAN GUARDIAN SHOW User Guide V1.0
14 / 32
EN
3.3. Headset connection
Several types of headsets of the VOKKERO range can be connected to VOKKERO Guardian SHOW. The headset type is automati-
cally detected by the terminal when connected.
3.3.1.
Plugging in a headset
Plug the headset into the LEMO connector
at the top end of the product, beside the
LCD.
Line up the 2 red marks of the product and
the connector
Note:
Do not force the headset; it should connect
easily; if this is not the case, check the
headset to make sure it isn’t damaged.
3.3.2.
Removing the headset
Pull on the ring of the headset to release the connector switch and pull out the Lemo connector
• Do not attempt to remove the headset by pulling or twisting or turning the
connector’s chassis.
Use the “Mic” icon on the terminal screen to make sure that the headset is properly connected. After disconnection of a headset, it
is necessary to wait a few moments for the mic icon to be crossed out before reconnecting a headset.
No accessory connected
No accessory connected
No accessory connected
Accessory connected
