VOKKERO GUARDIAN GUARDIAN SHOW User Guide V1.0
10 / 32
EN
INTRODUCTION
The operations described below allow you to rapidly and easily implement your VOKKERO Guardian communication sys-tem.
All the operations described are valid for all the VOKKERO® Guardian terminals listed below:
VOKKERO GUARDIAN - Show : VO8154AAD / VO8156AAD
Note: Your product reference is given on the label on the back of the terminal housing.
The VOKKERO Guardian system is ready-to-use; it features the following three main elements:
Terminals
Configurator/Charger: VOKKERO GUARDIAN - Configurator : VO8118AA
(Optional) Charger extension (1 to 4 maximum): VOKKERO GUARDIAN - Charger : VO8139AA
All the operating settings of the VOKKERO Guardian system are managed by the configurator which gives access to the Settings menu via a
touchscreen. The configurator must be connected to the power supply (otherwise it will not work) and up to 4 extensions units can be chained
with the configurator.
1. SYSTEM INSTALLATION PROCEDURE
Connect the power supply to the configurator or at the back of last chained charging unit if several are connected in a row.
Connect the power supply to the mains.
Insert the VOKKERO Guardian terminals in each slot as shown below.
Note 1: the position of each terminal in each particular charging slot has no influence on the nature of the configuration, except for Slot 1 (refer
to §3.2)
Note 2: if the purpose of the operation is solely to charge terminals or spare batteries, the use of extension unit only is fine.
The first configurator slot (i.e., closest to the LCD) is of importance to the system-configuration process; for more details, refer to §3.2.
2. SYSTEM DESCRIPTION
Vokkero®
Guardian Terminal
Vokkero® Guardian configurator
VO8118AA
Vokkero® Guardian extension
VO8139AA
