13 / 32
VOKKERO GUARDIAN GUARDIAN SHOW User Guide V1.0
EN
3. STARTING UP THE TERMINAL
Before starting your terminal, make sure that it has been properly charged using a compatible
charger.
Note 1: all settings, including volume, are saved when switching temrinal OFF.
Note 2: When LCD screen is set in Sleep Mode, to switch the On Off button when terminal is On (with sleeping LCD) will wake
up the backlit LCD. To switch Off the unit, press On Off button a second time.
Press the On/Off button to turn on the terminal.
The LCD screen should turn on and display the VOKKERO® logo. The LED above the On/off
button should also light up permanently.
Next, the Welcome Screen displays, followed by the product user’s name. By default, user name
is”Guardian”. Name can be customized in the configurator for each terminal (refer to §4.3.1).
To turn off the terminal, press and hold the “on/off” button.
Network status
Shows that the terminal is
connected to a network.
Channel or Group
Shows the active Channel
or Group
Role
Indicates the role of the terminal
M: Master role
2 to 16: Other roles
Microphone status
Either On or no microphone connec-
ted, or microphone Off.
3.1. LCD Screen Icons (by Default)
3.2. IMPORTANT: about M role
When setting up your Guardian Show system, the first step consists in attributing the Master role (M) to a single terminal of your
choice. This M role is crutial to synchronize the digital communication between every beltpack of the system.
The Master role (M) is automatically attributed to the terminal located in the configurator’s slot n°1 when doing a Quick Configura-
tion (See 4.2).
Note that Guardian Show system allows one M only in service, in order to perform normally. To attribute and operate more than one
M at a time will corrupt the entire system radio performance.
If you wish to use more terminals than your configurator’s slot capacity, or while terminals are already in operation, make sure to
always leave Slot n°1 free (empty) and use Fixed Key function (see 4.3.2)
Voice priority
Voice Priority status indicator shown
by a + mark near Role mark
