2
Fig. 1A
Boiler at reset/standby
Select this position if/when the boiler requires to be reset
Boiler switched OFF
Select this position if you want the boiler to remain OFF (this will over-ride any
heating/hot water request from the time-clock/programmer)
Boiler switched ON
Select this position when you want the boiler to respond to a heating/hot water
request from the time-clock/programmer
Temperature selector
Move the temperature selector clockwise to increase the boiler outlet temperature, or
counter-clockwise to reduce the outlet flow temperature
2-digit LED display
Displays the current outlet temperature of the boiler. During a fault condition, the
appropriate fault code will be displayed (refer to the users handbook for instructions
regarding fault codes)
Green LED lit
Boiler is working/responding to a heating/hot water request
Red LED lit
Boiler has identified a fault and has failed-safe. Refer to users handbook for
instructions on how to reset
MODE SELECTOR
SWITCH
RED LED
GREEN LED
TEMPERATURE SELECTOR
2-digit LED
display
°C