Supplied By www.heating spares.co Tel. 0161 620 6677
11
Mynute
SWITCHING
MONDAY - FRIDAY SATURDAY - SUNDAY
H/W
C/H
H/W
C/H
6.30am
6.30am
6.30am
12 noon
10.30pm
6.30am
8.30am
8.30am
9.00am
9.00am
12 noon
ˇ
ˇ
12 noon
12 noon
12 noon
12 noon
12 noon
4.30pm
4.30pm
4.00pm
4.00pm
11.00pm
10.30pm
11.00pm
OFF1-End of first timed period (OFF)
ON2-Start of second timed period (ON)
OFF2-End of second period (OFF)
ON3-Start of third period (ON)
OFF3-Final switch 'OFF'
ON1-Start of first timed period of day (ON)
PROGRAMME OPTIONS
Hot water and central heating can be operated
independantly.
The programmer gives you 4 options for both CH and HW:
OFF - Off all the time
TIMED - On/Off at all periods set in programme
ONCE - On for one period each day (ON1 >> OFF3)
ON - On all the time
Obtain the options you require by using the SELECT
buttons to move the arrows in the display to the appropri-
ate positions. Your module is now working using the
standard programme times. If these suit your needs there
is nothing else to do.
You can temporarily override the normal switching times
by pushing a button marked ADVANCE. This switches
ON to OFF to ON as you require, but the normal pro-
gramme switching times will not be permanently affected.
If you want to make changes to the programme, it is
suggested you write them down before making the changes.
CHANGING YOUR PROGRAMME
With the module in the operating mode and the display
showing the actual time of day, press the SET button. The
display will again show SET CLOCK ? but this has already
been done so push the SET button again.
The display will again show SET PROG ? and as it is the
programme settings which are to be changed press the
YES button.
The display will show
NOTE: The grouping of days in this way is to enable
timings which apply to each and all of the weekdays to be
set first, followed by the opportunity to change one or more
timings for any single day.
If you wish to set timings which will be the same for each
weekday press the YES button.
The display will show
press YES and make the changes or press SET if no
changes are required.
The display will now show
press YES to make changes or SET if no changes are
required.
The display will now show
press YES if you wish to make changes to Monday timings
or press SET to change the display to SET TUE PROG ?
Again press YES to make changes to Tuesday timings or
continue to operate the SET button to access each weekday
in turn.
If you press YES to make changes to the settings for a
particular day, the display will firstly show SET CH
Press YES will allow changes to be made to the central
heating settings, but pressing SET will cause the display
to show SET HW Press YES will allow the changes to be
made to the hot water settings, a further press of SET will
move the display on the next day.
After any Friday changes have been made press SET The
display will show
This gives you the chance to set timings which will apply
to both weekend days by answering YES. Further opera-
tion of the SET button accesses SAT and SUN for individual
timing changes.
Pressing SET after finishing any weekend programme
changes, or pressing SET in answer to SET PROG ?
returns the module to TEST ? Pressing SET again display
SET HOL ? Pressing SET again returns the module to the
normal operating mode.
SET
PROG ?
SAT SUN
SET
PROG ?
MON TUE WED THU FRI
MON TUE WED THU FRI
SET
PROG ?
CH
MON TUE WED THU FRI
SET
PROG ?
HW
PROG ?
SET
MON
SETTING INSTRUCTIONS FOR THE VOKERA 7 DAY 2 CHANNEL PROGRAMMER