Supplied By www.heating spares.co Tel. 0161 620 6677
9
Mynute
Once the programming has been completed you will have
to press the Select button – once only – to the
(on)
position if the boiler has been programmed to be ‘on’ at
that particular time.
5.2.5
ADVANCING OR LOCKING PROGRAMME
COMMANDS
By pressing the Select button you can advance
the time clock to the next command setting (from
‘on’ to ‘off’ or ‘off’ to ‘on’) or lock the time clock to a
particular command (‘on’ continuously or ‘off’
continuously).
●
- ON
●
- OFF
●
[
] – ON CONTINUOUSLY
●
[
] – OFF CONTINUOUSLY
NOTE
The actual time can be changed to account for
British summertime by simply pressing then re-
leasing the +/- 1h button.
HELPFUL HINTS
●
You can check and/or alter the programme
settings at any time by pressing the Prog button.
●
The number of unused ‘commands’ can be
checked by pressing the Prog button until FR is
displayed alongside the number of unused
commands.
●
In the event of a power failure, the clock has a
battery back-up. The programme will be held in
the memor y for approximately 2 weeks.
Charging time is 70 hours.
●
Take a note of the settings you have pro-
grammed, as local power surges can sometimes
reset the memory of the clock.
Fig. 6
VOKERA PROGRAMMERS