Supplied By www.heating spares.co Tel. 0161 620 6677
7
Mynute
VOKERA TIMECLOCKS
5.1
SETTING THE MECHANICAL CLOCK
The Vokera mechanical time clock can automati-
cally switch your boiler on and off at the same time
every day of the week. The minimum ’on’ or ‘off’
period can be as little as 15 minutes.
The outer clock face consists of 96 black pins.
Each pin represents a time period of fifteen min-
utes. When a pin is pushed towards the outside
of the clock face, the time clock is in an ‘on’
position, consequently when it is pushed towards
the inner part of the clock face it is in an ‘off’
position.
5.1.1
SETTING THE ‘ON’ & ‘OFF’ TIMES
Push the necessary amount of pins towards
the outer clock face for the time period that
you want the boiler to be ‘on’ (for example if
you wanted the boiler to be on between 4.00PM
and 8.00PM, push out the 16 pins located
between 16 and 20 on the clock face).
5.1.2
SETTING THE ‘TIME OF DAY’
Grasp the outer clock face and turn clock-wise
until the correct ‘time of day’ is opposite the black
pointer.
5.1.3
SELECTOR SWITCH
The time clock has a three-position switch. This
switch over-rides the timed settings (‘on’ & ‘off’
times) of the clock.