VOGT ICE TUBE-ICE P-24A, Service Manual

Page: 27 / 146

P24A & P34A Service Manual
RECEIPT OF YOUR TUBE-ICE MACHINE
12/18/12
2-3
Rated Capacity.
The Tube-Ice

machine is rated to produce a given amount of ice when operating
under the proper conditions as specified in this manual. You should be prepared to handle the ice
produced as it is discharged from the machine and move it to your storage or bagging area promptly.
The following specifications are given to help you do just that.
Model P24A-1.5” Model P24A-1.25” Model P24A-1”
Makeup Water
Temp.
Capacity Tons/day
(2000 lbs/24 hours)
Makeup
Water
GPM
Capacity Tons/day
(2000 lbs/24 hrs.)
Makeup
Water
GPM
Capacity Tons/day
(2000 lbs/24 hours)
Makeup
Water
GPM
85 ° F/29 ° C
19.5 4.06 21.0 4.37 20.0 4.18
80
°
F/24
°
C
20.0 4.16 21.5 4.48 20.5 4.27
75 ° F/23 ° C
20.5 4.27 22.0 4.60 21.0 4.37
70 ° F/21 ° C
21.0 4.38 22.6 4.71 21.5 4.48
65 ° F/18 ° C
21.6 4.49 23.2 4.84 22.0 4.59
60 ° F/15 ° C
22.2 4.62 23.9 4.97 22.6 4.71
55 ° F/13 ° C
22.8 4.75 24.5 5.11 23.2 4.83
Ice lb/harvest 750 lbs/340 Kg 600 lbs/272 Kg 450 lbs/204 Kg
Shipping weight 12,200 lbs/5533 Kg 12200 lbs/5533 Kg 11,800 lbs/5352 Kg
Operating weight 14,000 lbs/ 6350 Kg 14000 lbs/6350 Kg 13,450 lbs/6100 Kg
Model P34A-1.5” Model P34A-1.25” Model P34A-1”
Makeup Water
Temp.
Capacity Tons/day
(2000 lbs/24 hours)
Makeup
Water
GPM
Capacity Tons/day
(2000 lbs/24 hrs.)
Makeup
Water
GPM
Capacity Tons/day
(2000 lbs/24 hours)
Makeup
Water
GPM
85 ° F/29 ° C
36.0 7.50 39.5 8.24 35.9 7.48
80 ° F/24 ° C 36.9 7.69 40.5 8.45 36.7 7.66
75 ° F/23 ° C
37.8 7.89 41.6 8.67 37.6 7.84
70 ° F/21 ° C
38.8 8.10 42.7 8.90 38.6 8.04
65 ° F/18 ° C
39.9 8.32 43.8 9.14 39.6 8.25
60 ° F/15 ° C
41.0 8.55 45.1 9.39 40.6 8.47
55 ° F/13 ° C
42.2 8.79 46.4 9.66 41.7 8.70
Ice lb/harvest 1350 lbs/612 Kg 1300 lbs/589 Kg 850 lbs/385 Kg
Shipping weight 21500 lbs/9750 Kg 21500 lbs/9750 Kg 20900 lbs/9480 Kg
Operating weight 23000 lbs/10500 Kg 23000 lbs/10500 Kg 22400 lbs/10200 Kg
Notes:
1.
Makeup water is average flow and includes 25% blowdown. Peak flow rate is 15 GPM. at 40 PSI minimum. When water quality is good,
machine can be operated with 5% to 10% blowdown.
2. Ratings are at 90 ° F ambient for ice machine.
3. Capacity ratings are based on 85 ° F water entering condenser. For entering water temperatures above 85 ° F, deduct 4% in capacity for each 5 ° F.
4. Capacity shown is the average for model. Individual machines may vary up to 5% above or below depending on field conditions.
TABLE 2-1
P24A and P34A Specifications
Storage (prior to installation or start-up).
The machine must not be stored or installed in an area
that is subject to reach temperatures at or above 110 ° F (43.3 ° C).