vogel's PPL 1515, Installation Manual

Page: 14 / 25

Page 14
5.) Return the lift to its home position by pressing the UP button once)*
6.) Test the set Show position. Press the DOWN button once. The lift will now
descend to its pre-programmed position. If the lift does not descend to the pre-
programmed position then repeat the previous process)*
)* Note: The lift system must be in the AUTOMATIC MODE for the commands to work
properly.
4.3.4 Set SERVICE position
This position is lower than the show position. In service position the lift will descend to a
height at which it is easy to do projector maintenance and service.
1.) Get the system in Manual Mode (see 4.3.1)
2.) Press DOWN to lower the lift to the required Service height.
3.) Lock this position
o
Press and hold in the SET button (on the back)
o
Press STOP
o
Release STOP
o
Then release SET
4.) To return to the Automatic mode (see 4.3.2)
5.) Return the lift to its home position by pressing the UP button once)*
6.) Test the set Service position. Press and hold in the OVERRIDE button and
then press the DOWN button. The lift will now descend to the service position.
If the lift moves you can release both buttons)*
7.) To prevent unauthorised operation the service/maintenance function only works
when the hidden OVERRIDE + DOWN buttons are pushed.
)* Note: The lift system must be in the AUTOMATIC MODE for the commands to work
properly.
Lift system manual