Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW 6851
www.vogels.com
Upper Mounting Bar
Lower Mounting Bar
Flat Panel
Two people are required for this step.
Step 1.
Place the universal brackets and the flat panel over and onto the upper and lower mounting bars of the PFW 6851 and lower it down. Do not release the flat
panel until the flat panel is resting securely on the upper and lower mounting bars.
Screwdriver
Leveling Screw
(Pre-installed)
Locking Screw
(Pre-installed)
Step 1.
Use a screwdriver to adjust the two (2) M6 x 30
leveling screws, located on the top of the mounting
brackets.
Step 2.
Once the flat panel panel is level, ues a screwdriver
to tighten the two (2) M6 x 30 locking screws,
located on the bottom of the mounting brackets. Do
not over tighten these screws.
17
18
Attaching the Flat Panel to the Wall Plate
Securing the Leveling the Flat Panel
Do not release the flat panel until verifying the connection
between the universal brackets and the upper and lower
mounting bars.
In the event that the flat panel is tilted too far to one
side, the leveling screws will allow you to compensate
for this tilt by simply adjusting the screws with a screw
-
driver (see illustration to the right for a clear view).
Page 9
