background image

Rolluxe Case top serves as a built-in 
step stool to facilitate hanging and 
adjusting lights or graphics.

Revised:  March 27, 2014                                                   

 

            North America: 800.732.9395     Europe:  +353.98.66011

We recommend that you assemble and repack your display 
prior to your first event. It is important to follow each step in 
the order indicated. If you need additional assistance or have 
any questions, please call your nearest Nomadic LifeLine:
 

North America:

  

Ireland/Europe: 

 800.732.9395 

  + 

353.1.208.7261

 

United Kingdom: 

 

 

07699 734215   

   

CONGRATULATIONS!

Like thousands of Nomadic Display owners around the world, you now own the 
highest quality portable/modular display. Your Nomadic Instand® is specially 
designed to give you the ultimate in versatility. Classic (curved) and Plus (straight) 
frame systems fully integrate to meet your growing exhibit demands.  And your 
100% satisfaction is guaranteed by Nomadic. 

 

 

The “No Questions Asked” Lifetime Warranty

 

 

Your Instand frame is guaranteed for life. If it ever fails to 

 

 

function — for any reason — Nomadic Display will repair it 

 

 

free of charge for as long as you own it. Be sure to complete 

 

 

and return the enclosed warranty card immediately.

Made by Nomadic Display

Superior in design and strength, your Nomadic Display is built in Nomadic’s own 
manufacturing plants in the U.S. and Ireland. We use only premium grade materials 
and take pride in maintaining the highest standards of craftsmanship. Your display 
is delivered to you packed for maximum protection and quick assembly.

 

 

Nomadic Cares, Please Recycle

 

 

All Nomadic aluminum frames and cases can be recycled.

Proper Care & Maintenance of your Nomadic Display

  • Store display upright at room temperature
  • Do not subject to extreme heat or cold
  • Do not leave display in direct sunlight or trunk of auto
  • Return display to room temperature before handling
  • Avoid extreme bending of Panels or permanent creasing will occur
  • Use fabric brush to remove dust from FabriColor Panels

REMEMBER – 

Read the complete 
instructions about your 
Instand product before 
assembling. If you need 
additional assistance or have 
any questions, please call the 
nearest Nomadic LifeLine.

Setting Up Your Display

®

Summary of Contents for Rolluxe Case






Reviews: