Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFW 6851
www.vogels.com
12
13
Selecting the Mounting Hardware
1)
Insert a small straw or toothpick into the threaded inserts found
on the back of the flat panel.
2)
Use a pencil to mark the depth of the threaded insert on the small
straw or toothpick.
3)
Mark the straw or toothpick 1/8” above the depth of the threaded
insert, as shown in Figure 1.
4)
Insert the small straw or toothpick into the remaining threaded
inserts to compare and verify their depth using the straw or
toothpick’s 1/8” allowance mark.
5)
Locate the correct diameter screw for the threaded insert.
If the screw you selected is longer than the 1/8” allowance
mark on the small straw or toothpick, as shown in Figure 2 and
Figure 3, do not use this screw. The screw length must not
bypass the mark.
6) Test each size of the screws provided.
The correct screws should thread easily into the mounting
point and not pull out when tension is applied.
1˝
¼˝
Flat Panel
Universal Washer
Universal Spacer
Mounting Bracket
Mount Point
Mounting Screw
Universal Spacers allow you to attach the mounting bracket to flat-panels which
have recessed or uneven mount points. Each Universal Spacer adds 1/4” to the
distance between the mounting bracket and your flat-panel.
The Universal Spacers must be stacked and oriented as shown.
The Universal Spacers must only be installed between the mounting
bracket and your flat-panel.
Universal Spacer Installation (Optional)
If your flat panel has uneven mounting points, or recessed
mounting points, please use the provided universal spacers.
Page 6
