background image

Wall Mount User’s Manual /

 ウォールマウントキット取扱説明書

Contents

ご使用の際はお買い上げ販売店又は工事専門業者にご相談ください。液晶ディスプレイの取り付けに関する注意は、液晶ディスプレイの取

扱説明書を参照してください。

移動や設置および取り付けの際は、十分な安全を確保できる人数 ( 必ず 2 名以上 ) でおこなってください。

落下してけがの原因となることがあります。

取り付け時には、ネジや調節ピンをしっかりと確実に締め付けてください。

マルチスクリーンでお使いの場合は台数分のウォールマウントキットが必要です。

壁側金具 ( 下 ) は最下段のディスプレイ用にのみ使用します。2 段目以上のディスプレイには使用しません。

1

壁側金具(上)

壁側金具(下)

壁側金具(上)、(下)を取付寸法図にしたがって壁に取り付けます。

注意:壁側金具(上)、(下)の壁面取り付け用穴は図のような長円で

す。取り付けの際は適切なネジを選択してください。

机の上のような平らな場所にマットや毛布など柔らかいものを敷

き、その上にディスプレイを置きます。ディスプレイ背面四隅に

付属のネジでディスプレイ金具(上)、(下)を取り付けます。

両方のディスプレイ金具(上)に調節ピンをねじ込みます。

調節ピンが止まるまで手で回します。

2

3

ディスプレイを持ち上げて調節ピンを壁側金具(上)の穴に挿

入し、ディスプレイ金具(下)を壁側金具(下)のピンに挿入し

ます。

4

・壁側金具(上)   1

・壁側金具(下)   1

・ディスプレイ金具(上)   2

・ディスプレイ金具(下)   2

・調節ピン   2

・ストッパー   2

・ネジ   20

・六角レンチ   1

注意:移動や設置および取り付けの際は、十分な安全を確保できる人

数(必ず 2 名以上)でおこなってください。

落下してけがの原因となることがあります。

DO NOT mount the monitor yourself. Ask your dealer for assistance. For proper installation it is strongly 

recommended to use a trained, qualified technician.

Refer to the manual of the monitor for safety precautions and maintenance.

Moving and setting the monitor must be done by two or more people.

Tighten all screws and adjuster pins.

When mounting two or more X461UN monitors, you will need a wall mount for each monitor.

Wall bracket (bottom) is used for bottom step monitor only.

Attach wall brackets to the wall per the Installation Drawing.

 

NOTE: Wall bracket holes are oval as shown. Please select 

suitable screws for attaching.

To avoid damaging the screen face, place a protective sheet 

on the table underneath the LCD. Make sure there is nothing 

on the table that can damage the monitor. Lay the monitor 

on the table with the screen facing down. Attach four (4) 

monitor brackets (top) / (bottom) to the corners of monitor 

with attached screws.

Place the adjuster pin screws in the top monitor brackets (2). 

Turn by hand until the adjuster pin reaches the end and stops.

The adjuster pin is inserted through the hole of the wall brackets 

(top), and the monitor brackets (bottom) are inserted in the pin of 

the wall brackets (bottom). 

Caution: Moving and setting the monitor must be done by two or 

more people.

Wall bracket (top) x 1

Wall bracket (bottom) x 1

Monitor bracket (top) x 2

Monitor bracket (bottom) x 2

Adjuster pin x 2

Stopper x 2

Screws x 20

Hexagonal wrench x 1

付属品

Settings /

設定

Caution / 

注意

(WM-46UN-L)

This wall mount is only for NEC MultiSync X461UN.

このウォールマウントキットは X461UN 専用です。その他の機種には使用しないでください。

Reviews: