Vmatte Vmatte-HD HDL4.2, Operation Manual

Page: 14 / 57

Store and Recall
Click on the Store/Recall feature tab to view settings:
The
MBS Remote
software can store up to ten parameter settings for later recalls. These settings are saved in the MBS_Remote.ini file
under the
MBS Remote
installation folder (usually in
C:\Program Files\MBS_Remote
). To use the same settings on another PC, simply
copy the
MBS_Remote.ini
file to the installation folder of the target PC.
Store Parameters
Save Changes
Use the following steps to store current parameters:
Select one or more square boxes next to setting number 1~10. The top-most box is used to check/uncheck all. 1.
Enter names for the checked setting. The default text is
Setting1~Setting10
. 2.
Press Save Changes button. 3.
Discard Changes
Unsaved changes are discarded. The
MBS Remote
software reloads the settings saved in
MBS_Remote.ini
.
Recall Parameters
Use either one of the following methods to recall pre-stored parameters
Click on one of the recall button at the end of Setting1 ~ Setting10
Click on Menu > Recall menu and select an item
Upon recalling, parameters of the selected settings are loaded into software interface and passed on to all channels (meaning hardware
units, see Multi-Channel section for details). Output video is updated to reflect newly loaded settings after the completion of the recall
process. See the Status section on how to monitor the recall process.
Startup Settings
To choose the settings for the next software startup, click on one of the 12 round radio buttons:
Setting 1~10 – load the selected setting to all channels
Sync From Machine – obtain settings for the current channel, then load to software interface and to all other channels
Load Factory Default – load default settings to all channels
MBS Remote User Manual.pdf 12 2014/6/13 PM 02:23:38
12