E
N
4.3.1 How to use the Vmarker pen on the whiteboard surface
To be able to interact with the projected computers screen on the whiteboard accurately it
is important to calibrate the Vmarker sensor.
When the default pen settings are used. Use of the
Vmarker pen on the whiteboard surface is very easy.
You can interact with the computer by touching the
whiteboard surface with the tip of the Vmarker pen.
You will see the mouse cursor jumping to the tip of
the Vmarker pen and a left-click action will be
executed on that location.
You can do the same with use of the buttons on the
side of the Vmarker pen. In case you use the
buttons you do not have to touch the surface.
When you want to perform a left-click just press the
push-button most near to the tip. Push until to the
first resistance to have the primary action.
The mouse-cursor will jump to the tip of the Vmarker
pen and a lef-click action will be executed at that
location.
When you press the second button (until the
first resistance to have the primary action),
the mouse-cursor will jump to the tip of the
Vmarker pen. Releasing the button will show
the right-click-menu just like with the right-
mouse-button.
Of course it is possible to move the pen over
the surface while holding the buttons, to drag
and drop or to draw a line...
24
Vmarker Interactive Whiteboard
