R750EU5 - IE3 - TE4 - IE4 - ISE4
English
37
Ed.8 / 0-202
GB
mAINTENANCE DURING RUNNING-IN (FIRST 50 HoURS)
For each maintenance operation, fill in the “Periodic maintenance operation record
sheet” provided, so as to keep a trace of the operations performed and therefore
establish the most suitable methods for future operations.
Frequency
()
Component
Type of inter-
vention
Intervention
procedures
Reference
Every 0
hours (Every
day)
Engine oil (2)
Level control
Top up, if nec-
essary
See Engine oil
level control
Coolant (4)
Level control
Top up, if nec-
essary
See Engine
coolant level
check
Air filter
Check it is
clean
Clean with low
pressure com-
pressed air.
Check the clog-
ging indicator
that is installed
on the filter body
Clean the filter
or, if necessary,
replace it with a
new one.
See Cleaning
and replacement
of the air filter
Coolant fluid
radiator
Check it is
clean
Clean with a
soft brush
After the
first 50 hours
(at the end of
running-in)
Oil filter (3)
Replacement
See Oil filter
cartridge re-
placement
(1) If an hour counter is not available, the
frequency of the interventions should be calcu-
lated on the basis of a calendar day: one calen-
dar day corresponds to 12 hours of operation.
(2) In hard working conditions, such as dusty
environments and operation with extreme
loads, change the oil of the engine and the oil
filter every 150 working hours. If the engine
has not worked for the specified time, it will be
necessary to replace the oil and the filter all the
same once a year.
(3) If the engine has not been in operation for
the length of time indicated, the filter must still
be changed at least once every 12 months.
(4) If the engine has not been in operation for
the length of time indicated, the fluid must still
be changed at least once every 24 months.
(5) If the engine has not been in operation for
the length of time indicated, the belt must still
be changed at least once every 24 months
Periodic maintenance operation record
sheet
For each maintenance operation, fill in
the sheet, so as to keep a trace of the
operations performed and therefore
establish the most suitable methods
for future operations.
Tech Library http://engine.od.ua