VKI Technologies Eccellenza touch Operation Manual Download Page 84

Page: 84 / 84

ecti

on 6

- U

ating Fi

rmw

are

Operation Manual

VKI Publication #100308-003

Once the update is complete (after 5-10 minutes), you are prompted to remove the

USB flash drive to reboot the machine.

Remove the flash drive and the Eccellenza Touch will reboot itself twice. While it is

rebooting, re-install the plug onto the USB connector and re-install the waste bin.

It is possible that an error may be displayed on the screen. If this is the case, simply

clear the error.

Updating the Eccellenza Touch firmware will not overwrite or change any

existing settings or customizations you may have made in the programming.

These settings will be maintained.

Summary of Contents for Eccellenza touch





















































































Search results

Summary of Contents for Eccellenza touch

Reviews:

Related manuals for Eccellenza touch

Brands by name

Popular brands

VKI Technologies Eccellenza touch, Operation Manual

Search results

Summary of Contents for Eccellenza touch

Reviews:

Related manuals for Eccellenza touch

Brands by name

Popular brands