VKI Technologies Eccellenza touch Operation Manual Download Page 83

Page: 83 / 84

ecti

on 6

- U

ating Fi

rmw

are

Eccellenza Touch

VKI Publication #100308-003

E C T I O N

Updating Firmware

Firmware updates may be released periodically for the Eccellenza Touch. These updates may

consist of fixes, new options and features, customizations, etc. This section guides you through

the simple process of updating your equipment to the latest firmware.

Load the latest firmware files onto an

empty

USB flash drive (minimum 1GB).

Remove the waste bin.

Remove the plug from the USB connector and insert your USB flash drive into it.

Make

sure to push the USB flash drive into the USB connector as far as it can go.

Reboot the machine using the main power switch.

The updating process is automated and requires no user input. The screen reverts to

command-style prompts that provide progress information on the update.

Summary of Contents for Eccellenza touch





















































































Search results

Summary of Contents for Eccellenza touch

Reviews:

Related manuals for Eccellenza touch

Brands by name

Popular brands

VKI Technologies Eccellenza touch, Operation Manual

Search results

Summary of Contents for Eccellenza touch

Reviews:

Related manuals for Eccellenza touch

Brands by name

Popular brands