S
ecti
on 4
- M
ai
ntenance
Operation Manual
VKI Publication #100308-003
76
►
Inspect Electrical Wiring and Components
-
inspect all of the equipment wiring,
terminals, connectors and electrical components (valves, motors, relays, element,
etc.) for signs of wear, damage or overheating at connection points. Replace them,
if required.
►
Inspect Water Hoses and Tubing
-
inspect all plumbing connections, water hoses,
tubing, clamps, fittings and water related components (valves, water tank, etc.) for
signs of wear or damage. Replace them, if required.
Every 3 Years
►
Replace the following:
heater element, thermal cut-off switch, external relays, all
seals and gaskets and o-rings.
►
Refurbish the Brewer
- the brewer must be disassembled and all worn components
must be replaced.
Miscellaneous
►
Run the
Brewer Rinse Cycle
when prompted by the machine (a message appears
on the touch screen).
►
Run the
Powder Rinse Cycle
when prompted by the machine (a message appears
on the touch screen).
►
Verify Water Tank Components
- dependant on the local water conditions, inspect,
clean or replace components, as required.
►
Cleaning the Coffee Dispenser
- empty, remove, and clean the coffee dispenser
with warm water and dish soap. Thoroughly dry the dispenser before re-installing
it. For detailed information about removing the coffee dispenser, consult the
Eccellenza Touch Service Manual (
VKI Publication #100309-001
).
►
Cleaning the Powder Dispensers
- empty, remove, and clean the powder
dispensers with warm water and dish soap. Thoroughly dry the dispensers before
re-installing them. For detailed information about removing the powder dispensers,
consult the Eccellenza Touch Service Manual (
VKI Publication #100309-001
).
