Powering up the Sound Video System
1.
– After plugging the unit into the electrical
outlet, turn on the projector. Press the power button shown through the
top of the console.
2.
– The projector will display which video output it is
currently utilizing. To select the option you want to use, (eg. Computer,
VCR, DVD) press the “input” or “source” button until your desired video
source is showing.
Turn on the projector
Video Input
Using the Components
The Sound Video System comes equipped with an amplifier, line out, and
microphone input jack.
Amplifier
If the red LED is not already lit, located above the power button, press the
button to the “on” position. Once “on,” the red LED should light on the
amplifier.
Microphone
Connect the microphone to the input shown.
Some microphones have on/off switches on their handles. Verify that it is
turned on. The microphone will be ready to use as soon as it is plugged in.
The microphone has been programmed into the system to override any oth-
er audio output. Therefore, when you speak into the microphone, any oth-
er sounds that were playing will be lower in volume and the voice will be
heard through the speakers. Adjust the microphone volume control on the
amplifier.
Line Out
The red and white RCA jacks can connect external powered speakers to the
amplifier incorporating the AVRover into your existing sound system.
8
5
1
3
2
4
6
5
