Unplug the console during electrical storms or if it won’t be used for a long
period of time.
Unplug the console from the wall before you install any additional compo-
nents or perform any maintenance. In addition, make sure your peripheral
devices aren’t on when you’re making cable connections.
If you need to lift the unit for travel purposes, lift from the bottom, using
your legs to avoid personal injury or damage to the unit.
Find additional Safety information at www.avrover.com,
or call 800-724-0236
Components of the 3D Rover
Projector
XLR Input
Mixer /Amplifier
Computer
Projector
Adjustment
Retractable
25 ft power
cord
Non marking
locking wheels
Using the Computer:
1. Power up the projector as described in the above procedure.
2. Turn on the Computer by pressing the Power Button.
Turning off the System
1. Shut down the computer as you normally would power down
a computer.
2. Press the power button twice to turn off the projector. The
projector will ‘rev’ up its fan and then shutdown completely.
This may take a few moments, but be sure the projector does
shut down.
3.
DO NOT
unplug the system’s power cord until the projector
fan has stopped. Moving the system while the projector is still
hot may cause damage to the lamp.
4. Press the power buttons on the DVD/VHS and amplifier to
completely shut down the unit.
3
10
Locking Storage
Drawers
