VHT Raptor Manual Ver. 3.1
42
05
th
June 2012
WTX-1200A
– Simple PRESET Setting
The following keyboard controller commands work when the OSD MENU is not activated.
How to set up a PRESET
1. Move the camera to the desired PAN/TILT/ZOOM location using the Joystick.
2. Press No. 1 on the keyboard
3. Press
and hold the F1 Key until “SETTED” appears in the bottom right on the screen.
<Caution>
When using the shortcut key to set PRESETS, they can be in the range 1-64. With regard to
PRESETS of 65 and over, these should be set up using the OSD Menu.
WTX-1200A
– Simple PRESET Shift
Press the PRESET number followed by the F1 key and the camera moves to the
corresponding PRESET position. However, this is only valid up to PRESET no. 32 for which
PRESET DEFINE is set to ON.
