VHT Raptor Manual Ver. 3.1
12
05
th
June 2012
5. Telemetry Control
This unit is designed with a range of diverse Telemetry Control systems, based on
compatibility with industrial standard protocols. It works by using these integrated
protocols directly, or via 3
rd
party protocol convertors.
Telemetry Control is via way of RS485 or Coaxial based video transmission
equipment. Some limitation on protocols and/or software changes may not guarantee
to take full advantage of all the features from the manufacturer, and may limit features
and operation of the Raptor.
When the Telemetry Control is based on RS485, the address range is limited to 127.
■ On-Board Protocols
This unit provides the following On-Board Protocols:
• BBV 422
• Pelco D
• Pelco P
■ DIL (Dual In-Line) Switches
Two 8-way DIL Switches are contained within a waterproofed cover on the camera
body ; these are used to select camera address, communication protocol and baud
rate.
Cover retained by
four screws
Screws and cover
removed
