VHT Raptor Manual Ver. 3.1
5
05
th
June 2012
2. Safety Warning
* The purpose of this information is to ensure proper use of this product and to
prevent danger to damage to persons and property. Please observe all
precautions.
* The precautions are divided into “Warnings” and “Cautions” as distinguished
by the symbols shown below;
Warning:
Ignoring these warnings may result in death or serious injury.
Caution:
Ignoring these cautions may result in injury or damage to property.
Caution
: Instructions alert you to the
potential risk of injury or
damage to property
Warning
:
Instructions alert you to
the potential risk of death
or serious injury
Warning
1.
Only use the standard Raptor power adapter (
Product Code
RAP37-PSU
)
Using any other adapter could cause fire, electrical shock, or damage to the
product.
2.
Before connecting the power supply, and signal wires, make sure the external
connections are isolated. Connect the alarm signal wires to the alarm
terminals, the communication wires to the terminal block and the AC adaptor
to the AC power input receptacle (incorrectly connecting the power supply
may cause fire, electrical shock, or damage to the product).
3.
Do not connect multiple cameras to a single Raptor power adapter.
Exceeding the adapter’s current capacity can cause abnormal heat generation or fire.
4.
Securely plug, or connect, the power cord into the power receptacle.
An insecure or loose connection may cause a fire.
5.
When installing the camera on a wall or ceiling etc. fasten it securely using
suitable anchor bolts and/or fixings.
An unsecure camera could fall and cause serious personal injury, or even a fatality.
6.
Do not place conductive objects (e.g. screwdrivers, coins or other metal
objects) inside any part of the camera.
Doing so may cause personal injury, a fire or an electrical shock.
