Vivotek SD9363-EHL User Manual Download Page 33

Page: 33 / 332

VIVOTEK

User's Manual - 33

Resize Buttons

Click the Auto button, the video cell will resize automatically to fit the monitor.

Click 100% is to display the original homepage size.

Click 50% is to resize the homepage to 50% of its original size.

Click 25% is to resize the homepage to 25% of its original size.

Go to

If you have preset PTZ positions, these positions will be available in the Go to menu. Please refer to

page 101 for more information.

Live Video Window

■ The following window is displayed when the video mode is set to H.265 / H.264:

Video Title

: The video title can be configured. For more information, please refer to Video settings on

page 52.

H.265/H.264 Protocol and Media Options

: The transmission protocol and media options for H.265 /

H.264 video streaming. For further configuration, please refer to Client Settings on page 36.

Time

: Display the current time. For further configuration, please refer to Media > Image > General

settings on page 52.

Title and Time

: The video title and time can be stamped on the streaming video. For further configuration,

please refer to Media > Image > General settings on page 52. The zoom ratio is also displayed with the

title bar.

Video and Audio Control Buttons

: Depending on the Network Camera model and Network Camera

configuration, some buttons may not be available.

2.0x Title 2016/03/05 10:39:08

Video 17:08:56 2016/03/10

Title and Time

2016/03/10 17:08:56

Time

Video and Audio Control Buttons

Video (TPC-AV)

H.265/H.264 Protocol and Media Options

Video Title

Summary of Contents for SD9363-EHL













































































































































































































































































































































Search results

Summary of Contents for SD9363-EHL

Reviews:

Related manuals for SD9363-EHL

Brands by name

Popular brands

Vivotek SD9363-EHL, User Manual

Search results

Summary of Contents for SD9363-EHL

Reviews:

Related manuals for SD9363-EHL

Brands by name

Popular brands