2.3
Installing the ViVOpay VEND III
T
his section describes how to install the ViVOpay VEND III. The basic steps are:
Install SAMs if required
Connect to power and POS
Mount
Test the installation
2.3.1
Connector and SAM Access
The ViVOpay VEND III connectors and SAM slots are on the bottom of the reader.
To access the connectors:
1. Turn over the ViVOpay VEND III so that the connectors and SAM slots are visible.
2.3.2
Install a SAM Card
All ViVOpay VEND III models have three SAM card slots in addition to one SoftSAM. Consequently, the physical
SAMs are labeled SAM 2 through SAM 4, left to right. If you are using a SAM card(s) in your application, insert the
AM card as described in the following steps.
S
Warning:
Do not insert or remove a SAM card while the ViVOpay VEND III is powered. This will
cause
permanent damage to the SAM card.
To install a SAM card:
1. Use your fingernail to slide the lock bar down, away from the connectors, and pull the SAM cage away
from the closed position. The cage hinges on the edge furthest from the connector ports.
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 7 of 18
