2. Connect the other end to the host system. Refer to the pinouts given above if needed.
The ViVOpay VEND III displays the opening set of screens before it displays the
Welcome
screen.
T
he opening screens include:
Copyright screen
Firmware version screen
The reader should then display
Welcome
or
Please present card
or similar wording, depending upon the
pplication.
a
If the reader fails to power up, try reseating the power connector (or change to a different power outlet). For more
troubleshooting information, see
“Troubleshooting”
on page 13
.
2.3.4
Connect Ethernet
To connect to Ethernet
1. Insert a CAT5 or better cable into the Ethernet port. (Note The TCP protocol stack is not supported in the
initial product release)
2. Connect the other end of the Ethernet cable to an Ethernet switch or hub.
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 10 of 18
