48
Problem: The image is flat with no contrast
Adjust the Contrast setting in the Image menu in the OSD.
Problem: The color of the projected image does not match the source image
Adjust the Color Temperature and Gamma settings in the Image menu in the OSD.
Remote Control Problems
Problem: The Qumi does not respond to the remote control
1. Aim the remote control towards remote sensor on the Qumi.
2.
Make sure the path between remote and sensor is not obstructed.
3.
Turn off any fluorescent lights in the room.
4.
Check to see if the battery polarity is correct.
5.
Replace the batteries.
6.
Turn off other Infrared-enabled devices in the vicinity.
7. Have the remote control serviced.
Audio Problems
Problem: There is no sound
1.
Adjust the volume of the audio source.
2.
Check the audio cable connection.
3. Test the output of the audio source with other speakers.
4. Have the Qumi serviced.
Problem: The sound is distorted
1.
Check the audio cable connection.
2. Test the output of the audio source with other speakers.
3. Have the Qumi serviced.
Summary of Contents for QUMI
Page 1: ......
