39
Settings 2 Menu
To access the
Settings 2
menu and adjust the settings, perform the following steps:
1. Enter the
OSD
menu.
2.
Press the ◄ or ► button to select the
Settings 2
menu.
3.
Press the ▲ or ▼ button to move the cursor up and down in the
Settings 2
menu
and press .
4.
Press the ◄ or ► button to change values for each applicable setting.
ITEM
DESCRIPTION
Auto Source
Press the ◄ or ► button to enable or disable automatic source
detection.
No Signal Power Off
(min)
Press the ◄ or ► button to automatically turn the projector lamp
off when there is no signal.
Auto Power On
Press the ◄ or ► button to enable or disable automatic power on.
LED Mode
Press the ◄ or ► button to select the LED mode for higher
brightness or lower brightness to save LED life.
Reset All
Press
to reset all items to factory preset values. See
Reset All
on page 40.
Status
Press to enter the Status menu. See
Status
on page 41.
Advanced 1
Press to enter the Advanced 1 menu. See
Advanced 1
on page
42.
Advanced 2
Press to enter the Advanced 2 menu. See
Advanced 2
on page
43.
Summary of Contents for QUMI
Page 1: ......
