DU6771 DLP Projector User Manual
38
UN67711216EN00
OSD Operation - SIGNAL
Input Selection
This function is same as the shortcut key on the remote control. You can use the remote control or this function to select
the correct input source.
HDMI I
Select input source from HDIMI output of the computer or media device to HDMI I
HDMI II
Select input source from HDIMI output of the computer or media device to HDMI I
DVI-D
Select input source from DVI-D output of the computer or media device.
VGA
Select input source to VGA.
Component / BNC
Select Input source from BNC, the input source can be RGBHV or Component signal from computer or component
video enabled device.
HDBaseT
HDBaseT input source from the HDBaseT transmitter.
EDID Mode
Sometime the projector may not display the desired timing due to the compatibility of the device; you can use this
function to select the desired timing for projection. The preferred timings are listed by input source, you can use
▲or▼
button to select preferred timing for projection or select the timing automatically by setting it to Default.
Auto Search
Use the ◄► function to turn on/off Auto Search for the input source.
