DU6771 DLP Projector User Manual
10
UN67711216EN00
Remote Control
On
Use the button to turn on the projector.
OFF
Use the button to turn off the projector.
FOCUS
Adjust the focus of the projected image.
ZOOM
Zoom in/out the projected image.
TEST PATTERN
Use the button to show the test pattern. Press this button again
to switch to the next pattern. Press the EXIT button to return to
the projected image.
LENS SHIFT
Use the button to move the lens right or left.
ENTER
Use the button to select settings or confirm the changed
settings.
MENU
Press the button to display or hide the OSD Menu.
EXIT
Press the button to return to the previous Menu or exit the OSD
Menu.
AUTO PC
You can use this function to synchronize the VGA input signal
automatically.
BLANK
Press the button to enable the shutter to temporarily interrupt
the projection.
STATUS
Show OSD MENU – SERVICE.
VGA
Select VGA input source.
COMPONENT
Select Component input source.
ASPECT
Press the button to switch the aspect ratio.
HDMI1
Select HDMI1 input source.
HDMI2
Select HDMI2 input source.
DVI
Select DVI input source.
3G-SDI (Not Applicable).
DisplayPort (Not Applicable)
HDBaseT
Select HDBaseT input source.
CLEAR
Erase ID number stored in the remote control.
FREEZE
Freeze the projected image or resume the projection.
ID SET
Set ID number of the remote control.
Wired Remote Jack
Connect to WIRED REMOTE terminal on the projector
