EN-12
Setting the Flash Mode
Adjust the camera flash setting accordingly when you are taking pictures indoors
and outdoors. The flash has an effective range of approximately 0.5m to 3m.
You can choose one of these flash options:
Auto
When recording in a dark place and backlit conditions,
the camera will automatically determine whether the
flash is necessary.
Off
Used when recording in a place where flash photogra-
phy is prohibited, or when utilizing the night view or
indoor lightning for recording. The flash will always be
off during recording.
To select a flash option, toggle the Flash button until you see its icon appears on
the status LCD.
Setting the Self-timer
This mode automatically releases shutter after a delay so that the person taking the
picture can be included in the image.
1. Press the self-timer/ button, and this mode selection indicated by
icon on
the status LCD panel.
2. User can select any photography mode (flash/subject mode) by toggling the
mode/flash button until the desired flash and photography mode are shown by
their respective icons on the status LCD panel.
3. Press the shutter button.
4. After 10 seconds, an image is captured and the timer will turn itself off.
The self-timer LED on the front of the camera will blink in red for 10 seconds. In
the first 7 seconds, the LED blinks at a rate relatively slow and then blinks
rapidly for the last 3 seconds.
Video Mode
This mode gives the option to record video photography with 320 x 240 resolution.
In video mode, the number of frames will change to the remaining recording time (in
seconds) on the status LCD. The maximum recording time is 60 seconds.
1.Short-press Mode button to enter the Video mode (
).If the
does not
appear on status LCD, press mode button to toggle the setting while the
main mode icon is blinking. Press OK button to confirm.
2.Press OK button to start the video recording.
While recording, the recording time will decrease on the status LCD.
3.Press OK button once again to stop the recording.
