ENGLISH
EN-11
Note
Burst pictures are a series of pictures that are photographed in sequence. A set of
4 pictures can be taken in each capture. Flash is disabled when your camera is in
Burst mode.
To select single/burst photography in Record mode:
1.Short-press Mode button to enter the Capture mode(
) .If the
does not
appear on status LCD, press mode button to toggle the setting while the main
mode icon is blinking.
2.While the
is blinking, press or button to toggle the recording
photography selection.
Burst photography mode is indicated by the
icon on the status LCD.
3.Press OK button to confirm.
To select the image setting:
1.Short-press Mode button to enter the Capture mode (
).
If the
does not appear on status LCD, press mode button to toggle
the setting while the main mode icon is blinking.
2.While the
is blinking, press or button to toggle the
image setting.
3.Press OK button to confirm.
Note
The number of images can be captured depends on image setting. The number of
frames can be taken as follows:
Image Setting Indicator on Status LCD
Number of images
VGA&Fine
26
QVGA&Fine
104
VGA&Standard
91
QVGA&Standard
367
