EN-37
User’s Manual >>
Adjusting White Balance Manually
Manual white balance lets you configure the digital still ViviCam 3945s for a
particular light source and other conditions. Note that you must perform manual
white balance under the same conditions you will be shooting. You must also
have a piece of white paper or other similar object on hand in order to perform
this function.
1. Slide the mode switch to [ ] .
2. Press the
button. The [PICTURE] menu
appears.
3. Use the
T
/
X
buttons to select [MANUAL
WB], then press the
OK
button.
4. Point the ViviCam 3945s at an enclosed
gray card for which you can set the
white balance.
This starts the white balance
adjustment procedure.
5. U s e t h e
S
/
T
b u t t o n s t o s e l e c t
[EXECUTE], then press the
OK
button
to confirm.
The procedure of manual white
balance is complete.
If you with to cancel [MANUAL WB]
setting, select [CANCEL].
6. To exit from the menu, press the
button.
MANUAL WB
BACK :
SET :
EXECUTE
CANCEL
PICTURE
FUNCTION SETUP
Q
R
G B
WB
EXIT:
SELECT ITEM:
ENTRY:
MANUAL WB
CANCEL
WB
