Vivitar Vivicam 3655, User Manual

Page: 32 / 37

31
Viewing on the Display LCD
The Images already stored in the camera’s memory can be viewed in PLAY Mode. Entering play mode will cause the most
recently acquired image to be displayed on the Display LCD.
1. Set the camera to PLAY Mode
2. Scroll backwards and forwards through your pictures using zoom control
View Image information and thumbnails
General image information can be viewed. This information includes, Image number, Resolution, and the Date and Time at
which the picture was taken.
1. Set the camera to
PLAY
Mode
2. Pressing the
LCD
button once when an image is displayed
will cause the image information to be displayed over the
image.
3. Pressing the LCD button again while this image information
is displayed will cause the images to be displayed as
thumbnails,with nine images appearing on the screen at
the same time.
4.The Zoom Control can then be used to move the highlight
through the displayed images.
--Pressing the LCD button again while in thumbnail mode will
cause the currently highlighted thumbnail to be displayed full
screen on the Display LCD. The user can then continue to scroll
through the images as usual, using the Zoom Control.
Viewing as a Slide Show
The camera can setup a slideshow and playback the stored images for a specified interval.
1. Set the camera to
PLAY
Mode
2. Press
Menu
button to invoke the PLAY MENU
3. Use the zoom control to highlight selecting Slideshow
4. Press
OK
button to enter SLIDESHOW submenu
5. Use the zoom control to set the delay intervals between each displayed images
6. Press
OK
button to start playing the slideshow
1792
1200
0002
10.19.00
15:58