Vivitar Vivicam 3655, User Manual

Page: 15 / 37

14
Getting Started
Attaching the Strap
It is best to use the included carrying-strap whenever carrying the camera, and especially when taking pictures outdoors.
This will help to prevent the camera from being dropped or otherwise too roughly handled. Dropping the camera may cause
external or internal damage.
To attach the strap to the camera
1. Insert the small loop at the end of the strap
into one side of the camera’s strap holder.
2. Push inward until the loop comes out of the
other side of the strap holder.
3. Insert the other end of the strap through the
loop and pull it until the strap is securely
attached to the camera.
Power Supply
This camera features a two-way power supply that lets you use either batteries (AA-size Alkaline) or a household AC current.
Loading the Batteries
1. Slide the battery door in the direction indicated by the arrow.
2. The door should spring partially open. Gently
open it the rest of the way with your finger.
3. Insert the batteries and follow the polarity
directions indicated on the inner side of the
battery door.
4. Close the battery door.
If you are not going to be using the camera for an extended period of time, you should remove the batteries to
prevent leaks or corrosion.
Never use manganese batteries.
Never mix old and new batteries.
Low temperatures (under 0 C) may reduce the output efficiency of batteries, thereby shortening the operation
time of camera.
The recommended battery is AA-size alkaline battery.
NOTE